Zebra Technologies 14245L-003 manual 133

EPL Commands

O

Parameters	Details
S = Reverse sensor	Reverse the Transmissive (Gap) Sensor’s normal operation.
operation
Fp1 = Form Feed Setting	p1 = Sets the type of operation the feed button .
	f = Default, normal operation. Tap to feed.
	r = Reprint last label printed.
	i = Ignore the feed button.
Example •
O↵	: disables all options.
OC↵	: enables cutter only, labels
	are cut after each
	: label is printed, disables
	all other options
OD↵	: enables direct thermal mode
	on thermal transfer
	: printers, disables all other
	options
OCb↵	: labels are cut after a batch
	of five has printed,
…	: disables all other options
P5↵	: Sets the number of labels to
	print before the cut

133

12/16/13 EPL Programming Guide 14245L-003 Rev. A