Zebra Technologies 14245L-003 manual S

EPL Commands
S
144
14245L-003 Rev. A EPL Programming Guide 12/16/13
S
Speed Select
Description Use this command to select the print speed.
Mobile printers, such as the TR 220, ignore this command and automatically set speed to
optimize battery use.
Syntax Sp1
Parameters This table identifies the parameters for this format:
Parameters Details
p1 = Speed select value See the tables below.
Example • This example selects 2 ips (50 mmps).
S2↵
Model Value Speed Model Value Speed
GK420 2 2.0 ips (50 mm/s) 2824
2844
1 1.5 ips (37 mm/s)
3 3.0 ips (75 mm/s) 2 2.0 ips (50 mm/s)
4 4.0 ips (100 mm/s) 3 2.5 ips (63 mm/s)
5 5.0 ips (125 mm/s) 4 3.5 ips (83 mm/s)
GX420 2 2.0 ips (50 mm/s) 2443
(Orion)
1 1.5 ips (37 mm/s)
3 3.0 ips (75 mm/s) 2 2.0 ips (50 mm/s)
4 4.0 ips (100 mm/s) 3 2.5 ips (63 mm/s)
5 5.0 ips (125 mm/s) 2746
2746e
2348
2 2.0 ips (50 mm/s)
6 6.0 ips (150 mm/s) 3 3.0 ips (75 mm/s)
GX430 2 2.0 ips (50 mm/s) 4 4.0 ips (100 mm/s)
3 3.0 ips (75 mm/s) 5 5.0 ips (125 mm/s)
4 4.0 ips (100 mm/s) 6 6.0 ips (150 mm/s)
2722
2742
3742
3842
0 1.0 ips (25 mm/s) 2684
(Strata)
1 1.0 ips (25 mm/s)
1 1.5 ips (37 mm/s) 2 2.0 ips (50 mm/s)
2 2.0 ips (50 mm/s) 3 3.0 ips (75 mm/s)
4 4.0 ips (100 mm/s)