Zebra Technologies 14245L-003 manual Wlan.password, 293, U1 setvar wlan.password password

SGD Wireless Commands

wlan.password

293

wlan.password

Description This printer setting refers to the generic password that is used by the wireless securities that need a password. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Important • Kerberos has its own password field

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with a generic password for
	wireless securities.
	Format: ! U1 getvar "wlan.password"
	For protection a single "*" prints.
setvar	This command instructs the printer to set a generic password for the
	wireless securities that need a password.
	Format: ! U1 setvar "wlan.password" "value"
	Values: A maximum of 32 alphanumeric characters.
	Default: "password"

Example • This setvar example shows the value set to "password".

! U1 setvar "wlan.password" "password"

When the setvar value is set to "password", the getvar result is "*".

12/16/13 EPL Programming Guide 14245L-003 Rev. A