EPL Commands

xa

167

xa

AutoSense

Description This command is used to have the printer detect the label and gap length and set the sensor levels. This command will not enter into the Dump mode or print the printer configuration label.

Syntax xa

Parameters There are no parameters for this format.

Example • In this example, the printer will feed labels and measure the labels to set the Q values (label & gap length) and the sensor levels. The printer is at Top of Form (TOF) and ready to print.

xa

12/16/13

EPL Programming Guide

14245L-003 Rev. A

Page 167
Image 167
Zebra Technologies 14245L-003 manual AutoSense, 167, Syntax xa