Zebra Technologies 14245L-003 manual F= Bar code origin

EPL Commands

b

Parameters	Details
p9(f)= Bar code origin	Accepted Values: 0 or 1
point	Default Value: 1
	f1 - Center of bar code as defined by the automatically
	adjusted symbol size, i.e. width and height. Parameters p4
	and p5 values are maximum values only.
	f0 - Upper left corner of bar code.
p10(x)= module width (in	Accepted Values: 2 - 9 (i.e. x2-x9)
dots)	Default Value: Auto selects 6 (dots).
	Tests data with maximum size limit set by p4 and p5 and then
	the other optional parameters. The printer automatically
	reduces the module width in one dot increments until the data
	fits within the symbols maximum dimensions (and other
	applied parameters) or until 3 dots has failed, then reports an
	error.
p11(y) = set bar height	Accepted Values: 4 – 99 (i.e. y4-y99)
(in dots)	Default Value: 4 times module width (p10)
p12(r) = maximum row	Maximum limit for the number of rows to be used for auto
count	selecting symbol features.
p13(l) = maximum	Maximum limit for the number of columns to be used for auto
column count	selecting symbol features.
p14(t) = truncated flag	Accepted Values:
	0 = not truncated
	1 = truncated
	See the PDF 417 specification for details.

79

12/16/13 EPL Programming Guide 14245L-003 Rev. A