Zebra Technologies 14245L-003 manual Wlan.username, 306, U1 setvar wlan.username user

306

SGD Wireless Commands

wlan.username

wlan.username

Description This printer setting refers to the generic user name that is used by the wireless securities that need a user name. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Important • Kerberos has its own user name field.

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with a generic user name for
	the wireless securities that need a user name.
	Format: ! U1 getvar "wlan.username"
setvar	This command instructs the printer to set a generic user name for wireless
	securities that need a user name.
	Format: ! U1 setvar "wlan.username" "value"
	Values: A maximum of 32 alphanumeric characters
	Default: "user"

Example • This setvar example shows the value set to "user".

! U1 setvar "wlan.username" "user"

When the setvar value is set to "user", the getvar result is "user".

14245L-003 Rev. A EPL Programming Guide 12/16/13