266

SGD Wireless Commands

wlan.adhocchannel

wlan.adhocchannel

Description This printer setting refers to specifying the wireless channel for adhoc channel. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands

Details

 

 

getvar

This command instructs the printer to respond with the wireless channel

 

for adhoc channel mode.

 

Format: ! U1 getvar "wlan.adhocchannel"

 

 

setvar

This command instructs the printer to set the wireless channel for adhoc

 

channel mode.

 

Format: ! U1 setvar "wlan.adhocchannel" "value"

 

Values: Decimal value between 1 and 16 inclusive

 

Default: "1"

 

 

Example • This setvar example shows the value set to "1".

! U1 setvar "wlan.adhocchannel" "1"

When the setvar value is set to "1", the getvar result is "1".

14245L-003 Rev. A

EPL Programming Guide

12/16/13

Page 266
Image 266
Zebra Technologies 14245L-003 manual Wlan.adhocchannel, 266, U1 setvar wlan.adhocchannel