EPL Commands
U%
162
14245L-003 Rev. A EPL Programming Guide 12/16/13
U%

Host Prompts/Motor Temperature

Description This command will cause the printer to send to the host the motor temperature
status through the mobile printer’s serial port. This command applies to Mobile Printers Only
(TR 220).
The printer will send motor temperature in 2ºC increments to the host via the serial port. The
printer uses the data format of NNdeg C, where NN equals the motor temperature.
Range Reported (Degrees Celsius): 24≤NN<60
Syntax U%
Parameters There are no parameters for this format.
Example • In this example, the command is sent to the printer and the printer responds with
a motor temperature of 24 deg C.

U%↵