Zebra Technologies 14245L-003 manual Delete Form, 102

102

EPL Commands

FK

FK

Delete Form

Description This command is used to delete forms from memory.

Syntax FK [ “FORMNAME” “*”]

Parameters This table identifies the parameters for this format:

Parameters	Details
“FORMNAME”	By entering the name of a form, that form will be deleted
	from memory.
	• The name may be up to 8 characters long.
	• Form names stored by the printer are case sensitive and
	will be stored exactly as entered on the FS command line;
	i.e. “FORM1”, “form1” and “FoRm1” are three different
	forms when stored into the printer or when retrieved by
	the user.
	• Deleting a single form requires the FK”FORMNAME” be
	issued twice for each form to be deleted. Some label
	generation programs re-issue forms (form delete and
	store) every time a label is printed which reduces flash
	memory life.
“*” = Wild card	By including an “*” (wild card), ALL forms will be deleted
	from memory.
	The FK”*” does not need to be issued twice to delete all
	forms.

Example 1 • This example deletes the AFORM form. A second delete is requierd for flash printers.

FK"AFORM"↵

FK"AFORM"↵

Example 2 • This example deletes all forms.

FK"*"↵

14245L-003 Rev. A EPL Programming Guide 12/16/13