Zebra Technologies 14245L-003 manual Explanation of the Status Printout

36

Printer Configuration

Explanation of the Status Printout

Explanation of the Status Printout

Depending on your printer model, your configuration label will look similar to one of those shown below. See Figure 10 on page 325 for additional information.

Figure 4 • Configuration Label Print Samples

UKQ1935 V4.59 Serial port:96,N,8,1 Page Mode

Image buffer size:0245K Fmem:0 (bytes) Gmem:0 Emem:29600 Available: 100959 I8,0,001 rY JF WY S4 D00 R0,0 ZT UN

q832		Q1022,029
Option:d,Ff
oEw,x,y,z
16	23 31

Cover: T=143, C=166

Date: 10-05-94 Time:01:00:00

Now in DUMP MODE

Press Feed to exit

Dump Mode Print Sample

A. Printer I.D. code number and firmware version. B. Serial port configuration.

C.Programming Mode Print head resolution

D.Print head test pattern.

E. Amount of memory available for the Image buffer. F. Amount of memory used and memory available

for Form storage.

G. Amount of memory used and memory available for Graphics storage.

H. Amount of memory used and memory available

	for Soft fonts.
I. Total free memory available for Forms, Fonts,
	or Graphics
J.	Currently selected Character Set (I) and Image
	Buffer mode setting (r).
	rY = Double Buffering Enabled
	rN = Double Buffering Disabled
K.	Currently selected Print Speed (S),
	Heat Density (D),	Reference Point (R),
	Print Orientation (Z)	and Error Status (U).
L. Currently selected Form Width (q)
	and Length (Q).

M. Current Hardware and Software Option status. N. Current AutoSense Through (Web/Gap) Sensor

values. The three numbers represent; 1. Backing Transparent point

2. Set point

3. Label Transparent point.

O. Head Up (Open) Sensor settings

P. Current Date and Time set in Real Time Clock. Thess values will only be displayed if your printer is equipped with the Real Time Clock feature.

Q. Current Dump Mode Status.

14245L-003 EPL Programming Guide 12/16/13