Zebra Technologies 14245L-003 manual Reset Printer, 173, Syntax @

EPL Commands

^@

173

^@

Reset Printer

Description This command is used to reset the printer.

Syntax ^@

where ^ is 94 decimal

This command emulates Power Off and then Power On; thus reinitializing the printer.

•The reset command is unavailable during the operation of storing PCX graphics, soft fonts or while the printer is in dump mode.

•The reset command cannot be used in a stored form.

•The reset command can be sent to the printer during all other printing operations.

•The printer will ignore all commands sent while the reset command is executing, up to 2 seconds.

Parameters There are no parameters for this format.

Example • This example causes the printer to reset.

^@↵

12/16/13 EPL Programming Guide 14245L-003 Rev. A