Zebra Technologies 14245L-003 manual Wlan.ip.netmask, 280, U1 setvar wlan.ip.netmask

280

SGD Wireless Commands

wlan.ip.netmask

wlan.ip.netmask

Description This setting refers to the wireless print server’s subnet mask address. This value is ignored if the IP protocol is not set to permanent. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with wireless print server’s
	subnet mask.
	Format: ! U1 getvar "wlan.ip.netmask"
setvar	This command instructs the printer to change the wireless print servers’s
	subnet mask.
	Format: ! U1 setvar "wlan.ip.netmask" "value"
	Values: Any valid subnet mask.
	Default: "255.255.255.0"

Example • This setvar example shows the value set to "255.255.255.0".

! U1 setvar "wlan.ip.netmask" "255.255.255.0"

When the setvar value is set to "255.255.255.0", the getvar result is "255.255.255.0".

14245L-003 Rev. A EPL Programming Guide 12/16/13