Zebra Technologies 14245L-003 manual Ip.dhcp.cidprefix, 258, U1 setvar ip.dhcp.cidprefix PRT001

258

SGD Wireless Commands

ip.dhcp.cid_prefix

ip.dhcp.cid_prefix

Description This printer setting defines the prefix to be prepended to the DHCP client identifier (option 61) when DHCP is enabled and "ip.dhcp.cid_type" is set to "0"or "2". For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the client identifier
	prefix.
	Format: ! U1 getvar "ip.dhcp.cid_prefix"
setvar	This command instructs the printer to change the CID prefix.
	Format: ! U1 setvar "ip.dhcp.cid_prefix" "value"
	Values: Any text string up to 10 characters if the CID type is ASCII, or
	20 characters if the CID type is hexadecimal.
	Default Value: ""

Example • This setvar example shows the value set to "PRT001".

! U1 setvar "ip.dhcp.cid_prefix" "PRT001"

What the setvar value is set to is the getvar result. In this example, the getvar result is "PRT001".

14245L-003 Rev. A EPL Programming Guide 12/16/13