Zebra Technologies 14245L-003 manual Wlan.adhocautomode, 265

SGD Wireless Commands

wlan.adhocautomode

265

wlan.adhocautomode

Description This printer setting refers to enabling or disabling the adhoc auto mode. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the adhoc auto mode
	status.
	Format: ! U1 getvar "wlan.adhocautomode"
setvar	This command instructs the printer to set the adhoc auto mode.
	Format: ! U1 setvar "wlan.adhocautomode" "value"
	Values:
	"on" = adhoc auto mode enabled
	"off" = adhoc auto mode disabled
	Default: "off"

Example • This setvar example shows the value set to "on". ! U1 setvar "wlan.adhocautomode" "on"

When the setvar value is set to "on", the getvar result is "on".

12/16/13 EPL Programming Guide 14245L-003 Rev. A