American Standard M968852 Service, Test Installed Faucet, Care Instructions

5 SERVICE

To change direction of handle rotation, proceed as follows:

Turn valve to OFF position.

Thread counter-clock wise HANDLE BASE (1) to remove HANDLE ASSEMBLY (2) from ESCUTCHEON BASE (3).

Use a flat blade screw driver to remove SPRING CLIP (4).

Lift STOP WASHER (5), turn 90˚ and replace.

Replace SPRING CLIP (4). Reinstall HANDLE ASSEMBLY (2).

If spout drips, operate handles several times from OFF to ON position. Do not force - handles turn only 90˚.

4

1

TO REMOVE HANDLE

90˚

3

5

2

6 TEST INSTALLED FAUCET

Turn HANDLES to "off" position.

Remove AERATOR (1) using TOOL (2) supplied.

Turn hot and cold water supplies on. Operate both HANDLES to flush water lines thoroughly. Check spout connections for leaks.

Check all drain connections for leaks.

Turn handles to OFF position. Replace AERATOR (1).

1

2

7 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M968852 Rev.1.3