Philips MMS 305/A 3.500 manual Safety, Installation Illustration

Installation (Illustration page 3)

English

1.Connect the LINE IN cable (green color) from OUT 1 at the soundcard to INPUT 1 LINE , AND

2.Connect the SURROUND IN cable (black color) from OUT 2 at the soundcard to INPUT 1 SURR (only applicable if a 4-channel soundcard is available), AND/OR

3.Connect another LINE IN cable from another

stereo audio-visual source to INPUT 2 STEREO,

AND/OR

4.Connect another LINE IN cable from another stereo audio-visual source to INPUT 3 STEREO

5.Connect the front left satellite speaker to

SATELLITE FR.L

6.Connect the front right satellite speaker to

SATELLITE FR.R

7.Connect the surround left satellite speaker

to SATELLITE SR.L

8.Connect the surround right satellite speaker

to SATELLITE SR.R

9.Connect the Remote Control IR-EYEconnector to the REMOTE IR-EYEand place the eye on top of your monitor/ desktop PC

10.Connect the fixed mains power cord to the AC outlet

11.Switch on (and switch off as well) the system using the STANDBY button on the remote control

12.Tune the system using the controls on the soundcard/ sound source and the controls on the remote control

NOTE: Do not insert the power plug into the AC outlet until all connections are made!

Safety

•Do not expose the speakers to excessive heat (caused by heating equipment or direct sunlight). To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. If fluid spills into the speakers, disconnect any connections immediately and let the speakers dry before reusing them.

•You may clean the speakers with a soft, slightly dampened lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect.

•If the speakers do not operate, disconnect them from the power supply. Wait a few seconds before reconnecting them to the power supply.

8