Mitel 5624 manual Activate/Deactivate the Man-down and/or No-movement Alarm, Reset Alarm

5624 Wireless Handset User Guide

The handset location is sent along with the alarm, see Alarm with Location Information on page 39.

If configured in the Device Manager, an Acoustic Location Signal (ALS) is activated after the alarm has been sent, see “Acoustic Location Signal” on page 39.

The handset may be programmed to automatically call a predefined telephone number after the alarm has been sent, see “Automatic Call after Alarm” on page 39.

The Man-down and No-movement alarm functions are inactive under the following conditions:

•While the handset is placed in a charger.

•During calls (depending on settings), to avoid false alarms if the user tilts the handset or is motionless during a call.

•For a predefined period of time (default 10 minutes) if the Mute button is pressed during the alert signal.

Activate/Deactivate the Man-down and/or No-movement Alarm

1.Enter “Settings” , and step to “Alarm”.

2.Then select the wanted alarm(s) and press Back repeatedly.

The corresponding icon(s) appear on the display.

3.Follow the same steps to deactivate the alarm(s).

Cancel Man-down and No-movement Alarm

•Press the soft key “OK“ to confirm “Man-down warning. Cancel?“ or “No-movement warning. Cancel?“ which appears in the display during the alert signal or press any key.

Delay Man-down and No-movement Alarm Temporarily

•Press the Mute button during the alert signal and then press “Yes“ to confirm the message “Delay MD/NM detection?“.

The corresponding display icon will keep flashing until the alarm is active again (default 10 minutes).

Reset Alarm

To reset the alarm function after an alarm has been sent:

•Move the handset to an upright position (after Man-down).

•Move the handset (after No-movement).

•Press the Mute button if the Acoustic Location Signal is sounding.

38