Mitel 5624 manual Elements of the Handset, Wireless Handset User Guide

5624 Wireless Handset User Guide

Elements of the Handset

1	Multi-function button
	This button can be used as a short cut to functions: long or double press modes. In the Mitel 5624
	Personal Alarm, the button is used as an alarm push button only. See Define the Multifunction or
	Alarm Button on page 59 and Push-button Alarm on page 37.
2	Earpiece speaker
3	Volume button (up)
	To increase the speaker earpiece, headset, and loudspeaker volume
4	Volume button (down)
	To decrease the speaker earpiece, headset, and loudspeaker volume
5	Mute and PTT button
	To turn on/off audible signals in standby mode, or silence the ring signal at incoming call. During
	a call, a long press on the button changes between microphone on/off, same as Sound off key.
	During a PTT group call, the microphone is open as long as the button is depressed.
6	Soft keys
	The 3 soft keys can be pre-programmed or used with GUI
7	Call key
	To answer a call, to pre-dial a number, and a short cut to the Call list.
8	Four-way navigation key
	Navigation key with Left, Right, Up, Down with Confirmation (in the middle). You can program
	these keys for short cuts, except the middle key.
9	Voice mail access* (System-dependent feature)
	Quick access to the handset’s Voice mail by long press
10	Key lock and Upper/Lower case
	Combined key lock and Upper/Lower Case This key is to lock the keypad in combination with the
	soft key “Lock”. This key is also for switching between upper/lower case and digits.
11	Microphone
12	Space
	Used to add space between text and as a multi-purpose connector
13	Sound off key
	To turn on/off audible signals in idle mode, silencing the ring signal at incoming call, and to turn
	on/off the microphone during a call.
14	Tactile indicators
	There are two tactile indicators to indicate the centre of the key pad
15	On-hook and On/Off key
	Combined button: to end a call, to return to standby mode, and to switch the handset on/off by
	long press
16	Color display
	The full graphic type display is 128 pixels wide and 160 pixels high. The display has multiple colors
	and backlighting.
17	Headset connector
	The headset connector is used to connect a headset. The headset connector cover protects it
	from dust.
18	LED
	Indicates incoming call, messaging, low battery, and charging.

2