Mitel 5624 manual Exposure to Radio Frequency Signals, Environmental Requirements, Handset

Models: 5624

1 95
Download 95 pages 9.13 Kb
Page 14
Image 14
Exposure to Radio Frequency Signals

5624 Wireless Handset User Guide

Exposure to Radio Frequency Signals

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured when used at the ear is 1.38 W/kg. The telephone has also been tested when worn on the body using belt clip. The maximum measured SAR value in this configuration is 1.16 W/kg. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Use of non-Mitel approved accessories may violate the FCC and IC guidelines for RF exposure and should be avoided.

Environmental Requirements

5624 Handset

Only use the handset in temperatures between -5° C to +45° C (23° F to 113° F).

Avoid exposing the handset for direct sunlight or close to other heat sources.

Connect AC (power supply) to the desktop battery charger only to designated power sourc- es as indicated on the product.

Never change the AC cord or plug. If the plug does not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection increases the risk of electric shock.

Avoid volume levels that may be harmful to your hearing. Exposure to excessive sound pressure from a handset's earpiece or headset may cause permanently hearing loss.

Do not expose the handset to open flame.

Keep the handset away from excessive heat and moisture.

Avoid sudden temperature changes to prevent condensation in the handset. It is recom- mended to put the handset into an air tight plastic bag until the temperature is adjusted, for example, when entering or leaving a cold/heated building on a warm/cold day.

Protect your handset from aggressive liquids and vapors.

If the handset has been exposed for water or condensation, remove the battery immediately and let it dry completely before re-inserting the battery.

The handset may retain small metal objects around the mouth cap or ear cap region.

Keep the handset away from strong electromagnetic fields.

Do not place a cold handset in a charger.

6

Page 14
Image 14
Mitel 5624 manual Exposure to Radio Frequency Signals, Environmental Requirements, Wireless Handset User Guide