Red = IntelliCode 1 / Green = IntelliCode

PROGRAMMING REMOTES

to New Intellicode® 2 Openers.

All type remotes program in the same way.

Bring remote(s) to powerhead location. For Car2U® and HomeLink®, park car outside the garage with the ignition key in the “ACCESSORY” position. Each button must

be programmed individually following steps below.

1	ACTION	LED INDICATION/RESULT
	PROGRAM
	Press & Hold for
	2 seconds or until	BLUE	OFF
	round LED turns blue. SET	OFF	PURPLE
			FLASHING

PROGRAMMING INTELLICODE® 2 REMOTES to Intellicode® 1 (previous model) Openers.

The default setting of Intellicode® 2 must be changed.

The LED color displayed on the remote indicates the IntelliCode® mode.

Red = IntelliCode® 1 / Green = IntelliCode® 2

ACTION	LED INDICATION/RESULT
1 Select a button
NOT prorammed
to a new
Intellicode®2
opener

2	Choose a button on your		Both LEDs Off.
	Choose a button on your		Both LEDs Off.
	remote device. Press &	OFF
	release it twice.	OFF	OFF
	release it twice.	PURPLE	OFF
		PURPLE	OFF
		STEADY	OFF
		STEADY
3	Press & Release that same
	Press & Release that same	DOOR MOVES
	button again.	DOOR MOVES
	button again.

REMOTE BUTTON IS PROGRAMMED

NOTE: For additional openers—repeat the steps above using a different remote button for each.

Press & hold that button for until both the

RED & GREEN LEDs are ON. Release.

STAYS ON RED & GREEN

Press the same remote button 3 times.

RED WHEN BUTTON PRESSED

REMOTE BUTTON IS INTELLICODE® 1

FCC and IC CERTIFIED

This device complies with FCC Part 15 and RSS 210 of Industry Canada. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harful interference to radio or television reception, which may be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

sRe-orient or relocate the receiver antenna.

sIncrease the separation between the opener and receiver.

sConnect the opener into an outlet on a circuit different from that to which the receiver is connected.

sConsult your local dealer.

3Find the Learn Code Button and

	Learn Code Indicator LED on your	Red Indicator
	door opener.	LED
	– If your Door Opener has a black
	antenna wire and the serial
	number does not start with
	10 or higher, the Learn Code	Located
	Button and Indicator LED are	Located
	Button and Indicator LED are	on Opener
	located near the antenna. (The	Housing
	light lens may need to be
	opened. If you use an external
	receiver, it may need to be	Learn
	opened to access the Learn	Learn
	Code Button and Indicator LED.	Code
	–If Door Opener does not have an	Button
	–If Door Opener does not have an
	Antenna, you have an External
	Receiver. The External Receiver
	cover must be removed to
	access the Learn Code Button
	and Indicator LED.
4	Press the	Red Indicator LED BLINKS
	Lean Code
	Button
5	Press the same	Red Indicator LED OFF
	remote button
	twice.
6	Press the same
	remote button	DOOR MOVES
	again.	DOOR MOVES
	again.

REMOTE BUTTON IS PROGRAMMED TO OPENER

(Follow the TOP 2 steps above to shift back to Intellicode®2)

9/2011

1000 specifications

The Genie 1000 is a state-of-the-art aerial work platform designed to provide efficient aerial access solutions for various industrial and construction applications. Renowned for its robust build quality and advanced features, this unit combines functionality with ease of use, making it a favorite among professionals.

One of the standout features of the Genie 1000 is its compact design. With a narrow profile, it can easily navigate tight spaces and doorways, making it ideal for indoor and outdoor work environments. Its lightweight structure allows for easy transport between job sites, while still maintaining the strength and stability required for lifting tasks.

The Genie 1000 is equipped with an impressive maximum working height of 30 feet, allowing operators to reach elevated areas safely. Its platform capacity, which can accommodate up to 500 pounds, ensures that multiple workers and tools can be utilized simultaneously, enhancing productivity on the job. The unit also comes with a slide-out platform extension, granting additional reach when needed.

This aerial work platform employs advanced hydraulic technology, ensuring smooth and precise lifting and lowering operations. The Genie 1000 features a user-friendly control system that includes intuitive joystick controls, facilitating easy maneuverability. Safety is paramount, and this model is outfitted with various safety features, including an emergency stop button, guardrails, and a tilt alarm to prevent potential accidents during operation.

Another notable characteristic is its versatile power options. The Genie 1000 can be equipped with various power sources, including electric and diesel engines, depending on the operational requirements. This flexibility enables users to choose between an environmentally friendly electric model for indoor use and a robust diesel version for outdoor applications.

In terms of maintenance, the Genie 1000 is designed with serviceability in mind. Accessible components and clear maintenance points simplify routine checks and repairs, ensuring longevity and reliability.

Overall, the Genie 1000 stands out in the market for its exceptional performance, safety features, and ease of use. Its combination of compactness and capability makes it a vital tool in many industries, setting a new standard for aerial work platforms. Whether in construction, warehouse operations, or facility maintenance, the Genie 1000 is engineered to meet the demands of today’s workforce effectively.

Genie 1000 manual Red = IntelliCode 1 / Green = IntelliCode, FCC and IC Certified

Models: 1000