Programming Limits | Genie 1000 instruction

2PROGRAMMING LIMITS

WARNING

sMake sure doorway is in view and clear of obstacles and people to avoid injury or damage to property.

sDO NOT operate this unit from wall console before LIMITS and FORCE are set. Severe damage to the opener can occur.

sThe bullet MUST be engaged to carriage BEFORE setting limits. See Installation Poster (if provided) or call Customer Service at 800-35-GENIE or visit www.geniecompany.com.

NOTE: If bullet has NOT been engaged to the carriage, do so now. See page 9.

Please note that there is a 30 second timeout between each programming step.

If you see two flashing RED LEDs, you have initiated a timeout.

In the event of a timeout you must restart at beginning.

TRAVEL LIMITS

DOWN LIMIT

ACTION	LED INDICATION/RESULT
1	Long LED turns Blue, then flashes.
Press & hold
2 seconds or until	OFF	OFF
LEDs react. Release.	OFF	OFF
LEDs react. Release.	BLUE	FLASHING

2Press & hold

until door is fully		DOOR FULLY OPEN
closed. Then release.
3 Press &	PROGRAM	Both BLUE then LEDs Off confirms limit set.
Release.
	SET	BOTH FLASH BLUE		OFF
	SET	BOTH FLASH BLUE		OFF
		During the initial setting
		of the limits- the LEDs will		RED RED
		turn to RED—NOT OFF		RED RED
UP LIMIT
4		Long LED turns Blue,	Then Long LED OFF
Press & hold		Round LED OFF.	Round LED Flashing.
2 seconds or until		OFF		FLASHING
LEDs react. Release.		OFF		FLASHING
		ON	OFF

5Press & hold

	until door is fully		DOOR FULLY CLOSED
	open. Then release.
6	Press &	PROGRAM	Both BLUE then LEDs Off confirms limit set.
	Press &
	Release.
		SET	BOTH FLASH BLUE	OFF
		SET	BOTH FLASH BLUE	OFF

DOOR LIMITS ARE SET

SET FORCE NEXT

FORCE CONTROL

ACTION

INDICATION/RESULT

1ON WALL CONSOLE

	Press &	Door fully closes.
	Release
	Open/Close
	button.
	2	Door fully opens.
	Press &	Door fully opens.
	Press &
	Release
	Open/Close
	button.

FORCE CONTROL IS SET

CONTACT REVERSE TEST

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, door opener could begin to run, so stay away from moving door and its parts.

The Force and Limit settings MUST be COMPLETED before performing Contact Reverse Test.

1. Test.

	ACTION	INDICATION/RESULT
	1
	Press &	DOOR OPENS.
	Release the	DOOR OPENS.
	Release the
	Open/Close
	button.
	2

Place a 2" x 4" board (laid flat) under center of door opening.

	3	DOOR CLOSES.
	Press &	DOOR CLOSES.
	Press &	s When door contacts board,
	Release the	it must stop and reverse direction
	Open/Close	(within 2 seconds) to the fully
	button.	open position.

2.Adjustment, if needed.

ssIf the door stops before it contacts the board

or it does not reverse, it may be due to an improperly set down limit. Repeat TRAVEL LIMITS program and Test again. Repeat as needed until door passes test. For further help refer to Maintenance &Troubleshooting, page 13.

Once the Contact Revese Test is complete, continue with programming Remotes.

9/2011

1000 specifications

The Genie 1000 is a state-of-the-art aerial work platform designed to provide efficient aerial access solutions for various industrial and construction applications. Renowned for its robust build quality and advanced features, this unit combines functionality with ease of use, making it a favorite among professionals.

One of the standout features of the Genie 1000 is its compact design. With a narrow profile, it can easily navigate tight spaces and doorways, making it ideal for indoor and outdoor work environments. Its lightweight structure allows for easy transport between job sites, while still maintaining the strength and stability required for lifting tasks.

The Genie 1000 is equipped with an impressive maximum working height of 30 feet, allowing operators to reach elevated areas safely. Its platform capacity, which can accommodate up to 500 pounds, ensures that multiple workers and tools can be utilized simultaneously, enhancing productivity on the job. The unit also comes with a slide-out platform extension, granting additional reach when needed.

This aerial work platform employs advanced hydraulic technology, ensuring smooth and precise lifting and lowering operations. The Genie 1000 features a user-friendly control system that includes intuitive joystick controls, facilitating easy maneuverability. Safety is paramount, and this model is outfitted with various safety features, including an emergency stop button, guardrails, and a tilt alarm to prevent potential accidents during operation.

Another notable characteristic is its versatile power options. The Genie 1000 can be equipped with various power sources, including electric and diesel engines, depending on the operational requirements. This flexibility enables users to choose between an environmentally friendly electric model for indoor use and a robust diesel version for outdoor applications.

In terms of maintenance, the Genie 1000 is designed with serviceability in mind. Accessible components and clear maintenance points simplify routine checks and repairs, ensuring longevity and reliability.

Overall, the Genie 1000 stands out in the market for its exceptional performance, safety features, and ease of use. Its combination of compactness and capability makes it a vital tool in many industries, setting a new standard for aerial work platforms. Whether in construction, warehouse operations, or facility maintenance, the Genie 1000 is engineered to meet the demands of today’s workforce effectively.

Genie 1000 manual Programming Limits, Keep people clear of opening while door is moving

Models: 1000