SunBriteTV 3260HD -318C-120801 manual Connecting to a DVD Player Connecting with S-Video fair

TV Installation – Rear Panel Connection Diagrams

CONNECTING TO A DVD PLAYER (Continued)

Connecting with S-Video (fair)	Connecting with
	Composite (Fair)

1.Make sure the power of the TV and your DVD player is turned off.

2.Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and Composite’s S-Video connector port off the back of your TV.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player and Composite’s white connector port off the back of your TV.

4.Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your DVD player.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (S-Video).

Please note:

1.Make sure the power of the TV and your DVD player is turned off.

2.Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your DVD player and Composite’s Yellow Video connector port off the back of your TV.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player and Composite’s white connector port off the back of your TV.

4.Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your DVD player.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (CVBS).

1.If AV 1 is already occupied, use AV2, as your connection port, and switch source to AV 2 (S-Video)

2.Reference the DVD player’s manual to make sure the DVD player is configured to output correctly to the TV.

3.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

SunBriteTV Model 3260HD Operator’s Manual Page 13