--:- <PDU_ID> cli-> [cycle|on|off]<outlet number>,<outlet number>
To powercontrol (on, off, cycle, lock, unlock) outletsof one specific PDU under the
powermanagement level:
1. Go to the outlet level for the specific PDU.
--:- / cli-> cd power_management/pdus/<PDU_ID>/outlets
2. Launch the power command wit h a specific outlet number, range of outlet s(use a hy phen
to specify the rang e) or list of outlet s (number or name separated by a comma).
--:- outlets cli-> [cycle|on|off] [<outlet number>]
-or-
--:- outlets cli-> [cycle|on|off] <outlet number>-<outlet number]
-or-
--:- outlets cli-> [cycle|on|off] <outlet number>,<outlet number>
passwd
Configure the password for the current user. The terminal does no t echo the password.
Syntax:
--:- / cli-> passwd
opiepasswd
Configure a one time password (OTP) for the local user. After you typ e the command, you will
be asked for the p ass phrase to use for the OTP.
NOTE: Usethis command to r estart the sequence num ber.
Syntax:
--:- / cli-> opiepasswd -f -c <username>
Example:
opiepasswd -f -c teste
Adding teste:
Only use this method from the console; NEVER from remote. If you are
using telnet, xterm, or a dial-in, type ^C now or exit with no password.
Then run opiepasswd without the -c parameter.
Using MD5 to compute responses.
Enter new secret pass phrase:
Again new secret pass phrase:
ID teste OTP key is 499 AC0241
FOOD HUGH SKI ALMA LURK BRAD
16 Cyclades™ ACS6000 A dvanced Console Server Command Reference Guide