Ports Navigation T ree
otp_login_authentication=
ppp_connection=
ppp|pap_authentication=
Command Summary
set_cas
Editsthe command to configure a listof serial ports with the CAS pro-
file.Syntax:set_cas<serial port number>, <serial port number> T his
commandhas five sub-nodes: physical,cas, data_bu ffering, alerts and
power.
set_dial_in Editsthecommand to configure one serial port with the Dial-In pr ofile.
Syntax:set_dialin<serialport number >
set_power
Editsthe command to configure a listof serial ports with the Power pr o-
file.Syntax:set_power <serialpor t number>, [<serial port number>]
Thisedit has two sub-no des: physicaland pow er.
clone_ports Copiesthe configuration fr om one por t to a list of serial por ts. Syntax:
clone_ports<serialport number>
reset_port_to_factory
Resetsthe serial ports to fa ctory configuration. (This is disabled for
CASprofile.) Syntax: reset_por t_to_factory<serial port numb er>,
[<serialport number>]
enable_ports Enablesserialpor ts. Syntax: enable_ports<serial port number >,
[<serialport number>]
disable_ports Disablesserialports. Syntax: disable_ports<serial port n umber>,
[<serialport number>]
Table 4.14: Serial Port Commands
Example of how to set a list of serial p orts 2,5 and 6 w ith the CAS Profile and enablethe status:
--:- serial_ports cli-> cd /ports/serial_ports
--:- serial_ports cli-> set_cas 2,5,6
--:#- [serial_ports/physical] cli-> set status=enabled
--:#- [serial_ports/physical] cli-> show
Selected items: 2|5|6
Port: 2
enable_cisco_rj45_pin-out = no
42 Cyclades™ ACS6000 A dvanced Console Server Command Reference Guide