Network Navigation T ree
primary_dns=
secondary_dns=
enable_ipv6=
get_dns_from_dhcpv6=
get_domain_from_dhcpv6=
enable_ipv4_multiple_routing_tables=
Network/IPv4 and IPv6
IPv4 addresses are always enabled. An administrator can also enab le IPv6 addresses at the
appliance_settin gs/network/ipv6 level .A proced uret o enable IPv6 is used as an example in
CLIEq uivalent Actio ns to Web Manag er Checkbox Select ion on page 19.
IPv4an d IPv6 Navigation Tree
ipv4_static_routes
default_3
gateway=
interface=
metric=
ipv6_static_routes
Table 4.7: Network/IPv4 and IPv6Optio ns
Network/Devices
The procedure to co nfigure a static IP address for the primary Ethernet interface is u sually
performed during installat ion so that administrators have a fixed IPad dress for access to the
web manager and can finish configuration .
To configurea IPv4 or IPv6 static IP address:
NOTE: Thisprocedure configures either an IPv4 or I Pv6static IP address for the ETH0 ( eth0) or the ETH 1 (eth1)
port.You can configure an IPv6 staticIP addr essonly if IPv6 isenabled.
Chapter 4: CLI Overvi ew for Administrators 35