--:- auxiliary_ports cli-> show
Device Name: ttyM1
status = disabled
speed = 38400
init_chat = "" \d\d\d+++\d\d\dATZ OK
ppp_address = no_address
ppp_authentication = none
chap-interval = 0
chap-max-challenge = 10
chap-restart = 3
ppp_idle_timeout = 0
--:- auxiliary_ports cli->set status=enabled
--:- auxiliary_ports cli->commit

Appliance withoutan internal modem:

Ifn o internal modem is instal led, the port name is tty a1.

Enter the commands: se t_dial-inor s et_power to configure the auxiliary po rt.

--:- / cli-> cd ports/auxiliary_ports/
--:- auxiliary_ports cli-> show
Port Device Status Profile
===== ====== ======== ============
ttyA1 ttyA1 disabled unconfigured
Type ls to see availables sub-nodes.
--:- auxiliary_ports cli->
Pluggable Devices

Enter cd pluggable_devices to navi gate to the pluggable_d evices level.

--:- / cli-> cd pluggable_devices
Pluggable Devices Navig ation Tree
device_name
device_type
card
device_info
Table 4.15: Pluggab le Devices Options

44 Cyclades™ ACS6000 A dvanced Console Server Command Reference Guide