Agilent Technologies 87075C manual Parts List, Ordering Information, Rebuilt-Exchange Assemblies

Service

Parts List

Parts List

This section provides ordering information and lists the part numbers for the various replaceable parts, kits, and accessories for your multiport test set.

Ordering Information

To order a part listed in the replaceable parts lists:

1.Determine the part number and quantity required.

2.Mail the information to the nearest Agilent Technologies office or, in the U.S., call the hotline number listed in the following section.

To order a part not listed in the replaceable parts lists:

1.Note the instrument model number, serial number and options (see the rear panel of the test set).

2.Describe the part and its function.

3.Determine the quantity required.

4.Mail the information to the nearest Agilent Technologies office or, in the U.S., call the hotline number listed in the following section.

Call (800)403-0801 to Order Parts Fast (U.S. Only)

When you have gathered the information required to place an order, contact Agilent’s direct ordering team by calling the toll-free hotline number shown above. Orders may be placed Monday through Friday,

6 AM to 5 PM (Pacific Standard Time).

The parts specialists have direct online access to replacement parts inventory corresponding to the replaceable parts lists in this manual. Four day delivery time is standard; there is a charge for hotline one-day delivery.

This information applies to the United States only. Outside the United States, you must contact Agilent Technologies. (Refer to page 120.)

Rebuilt-Exchange Assemblies

Under the rebuilt-exchange assembly program, certain factory-repaired and tested assemblies are available on a trade-in basis. These assemblies cost less than a new assembly, and meet all factory specifications required of a new assembly.

Chapter 9 139