Agilent Technologies 87075C SCPI.SENSeCh.CORRection.MULTiport.COLLect ECAL, COM Object Reference

COM Object Reference

SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. ECAL

SCPI.SENSe(Ch).CORRection.MULTiport.COLLect.

ECAL

Object type	Property
Syntax	SCPI.SENSe(Ch).CORRection.MULTiport.COLLect.ECAL = Data
Description	For channel 1 to channel 4, performs the calibration of the specified ports using
	ECAL. This command makes a measurement of the standard and calculates
	calibration coefficient successively. The calibration executed here is the test set
	calibration specified by SCPI.SENSe(Ch).CORRection.MULTiport.COLLect.
	METHod on page 98.
NOTE	If 2 ports you specify are not a port pair, an error occurs. Also, if
	SCPI.SENSe(Ch).MULTiport.STATe on page 107 is off, an error occurs.
Variable
		Data
	Description	Ports for ECal
		•Data (0)	port 1 of pair port
		•Data (1)	port 2 of pair port
	Data type	Variant type (Variant)
	Note	No query
	For information on the variable (Ch), see Table 7-2, “Variable (Ch),” on page 91.
Examples	Dim EcalPort(1) As Variant
	EcalPort(0) = 1
	EcalPort(1) = 2
	SCPI.SENSe(1).CORRection.MULTiport.COLLect.ECAL = EcalPort
Related objects	SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. SAVE on page 100
Equivalent key	[CAL] - Test Set Cal - Calibration - Port x-y - Ecal

Chapter 7 97