Agilent Technologies 87075C manual If You are Using an 8712ET/ES or 8714ET/ES Analyzer

Introduction and Installation

If You are Using an 8712ET/ES or 8714ET/ES Analyzer

If You are Using an 8712ET/ES or 8714ET/ES Analyzer

This document is intended for use with E5061A and E5062A analyzers, so some of the information (for example, key presses and calibration features) does not apply to your analyzer. You can order the copy of the manual specifically written for using the 87075C with 8712ET/ES and 8714ET/ES analyzers with the part number

87050-90026 by contacting Agilent Technologies. Refer to page 120 for contact information. The manual can be also viewed in the Agilent web site:

http://www.agilent.com/find/manuals

6 Chapter 1