Agilent Technologies 87075C manual SENS1-4MULTPORT1-2SEL, SENS1-4MULTPROP on

	SCPI Command Reference
	:SENS{1-4}:MULT:PORT{1-2}:SEL
	:SENS{1-4}:MULT:PORT{1-2}:SEL
Syntax	:SENSe{[1]234}:MULTiport:PORT{[1]2}:SELect <value>
	:SENSe{[1]234}:MULTiport:PORT{[1]2}:SELect?
Description	For channel 1 to channel 4, specifies ports to which the reflection port (port 1) of the
	test set and the transmission port (port 2) are connected. The same port cannot be
	specified as a port to which port 1 and port 2 are connected.
Parameters
			<value>
	Description		Port numbers to which port 1 and port 2 of the test set are
			connected.
	Range		1 to 12
	Preset value		Reflection port: 1 Transmission port: 2
Query response	<value><newline><^END>
Example of use	10	OUTPUT 717;":SENS1:MULT:PORT1:SEL 3"
	20	OUTPUT 717;":SENS1:MULT:PORT1:SEL?"
	30	ENTER 717;A
Related commands	:SENS{1-4}:MULT on page 81
	:SENS{1-4}:MULT:PROP on page 83
Equivalent key	[System] - 87075 Setup - Reflection - Port x (x= from 1 to 12)
	[System] - 87075 Setup - Transmission - Port y (y= from 1 to 12)

82 Chapter 6