Agilent Technologies 87075C manual Line Module, Front/Rear Panel, Power Cables, Chapter

	Front/Rear Panel
	Rear Panel
	Line Module
	The line module contains the power cable receptacle. See “Step 4. Satisfy Electrical
	and Environmental Requirements” for power supply requirements.
Power Cables	The line power cable is supplied in one of several configurations, depending on the
	destination of the original shipment.
	Each instrument is equipped with a three-wire power cable. When connected to an
	appropriate ac power receptacle, this cable grounds the instrument chassis. The type
	of power cable shipped with each instrument depends on the country of destination.
	See Figure 4-3for the part numbers of these power cables. Cables are available in
	different lengths. Check with your nearest Agilent service center for descriptions
	and part numbers of cables other than those described in Figure 4-3.
WARNING	This is a Safety Class I product (provided with a protective earthing ground
	incorporated in the power cord). The mains plug shall only be inserted in a
	socket outlet provided with a protective earth contact. Any interruption of the
	protective conductor, inside or outside the instrument, is likely to make the
	instrument dangerous. Intentional interruption is prohibited.

Chapter 4 55