Agilent Technologies 87075C Introduction and Installation, Test Set Accessories Supplied, Item No

Introduction and Installation

Installation

Table 1-1	Test Set Accessories Supplied
Item No.	Description	Quantity	Part Number
1	Power Cord	1	See Figure 4-3.
2	Type-N Cable (Analyzer to test set’s	1	(75 Ω) 87075-60026
	REFLECTION Port)1
3	Type-N Cable (Analyzer to test set’s	1	(75 Ω) 87075-60028
	TRANSMISSION Port)1
4	Type-N Cable (Analyzer to test set’s	1	(75 Ω) 87075-60027
	REFLECTION Port)2
5	Type-N Cable (Analyzer to test set’s	1	(75 Ω) 87075-60029
	TRANSMISSION Port)2
6	Parallel Port Interface Cable	1	8120-6818
7	87075C User's and Service Guide (for E506x	1	87075-90027
	Network Analyzers)
	87050E and 87075C User’s and Service Guide	1	87050-90026
	(for 871x Network Analyzers)
8	Test Set Calibration Disk	1	N/A
9	Performance Test Programs Disks	1	08714-60049
	(DOS and LIF formats)
10	CD-ROM	1	08714-90051

1.Not to be used with a rack-mounted system or if the analyzer has had its bottom feet removed. See Figure 1-6to see how these cables are to be connected.

2.You will only receive these cables if you ordered Option 1CM (rack mount kit). Use these cables if you are rack-mounting your system, or if the bottom feet of the analyzer have been removed. See Figure 1-6for information on how to connect these cables.

10 Chapter 1