Agilent Technologies 87075C manual SENS1-4CORRMULTSELF

	SCPI Command Reference
	:SENS{1-4}:CORR:MULT:SELF
	:SENS{1-4}:CORR:MULT:SELF
Syntax	:SENSe{[1]234}:CORRection:MULTiport:SELF[:STATe] {ONOFF10}
	:SENSe{[1]234}:CORRection:MULTiport:SELF[:STATe]?
Description	For channel 1 to channel 4, specifies whether to execute the self calibration of the
	test set automatically at user defined interval. To specify the interval, use the
	:SENS{1-4}:CORR:MULT:SELF:TIMon page 80 command. Note that, if
	:SENS{1-4}:MULTon page 81 is off, self calibration is not executed automatically
	even if it is turned on with this command.
Parameters
			Description
	ON or 1		Executes self calibration for the test set at user defined
			interval.
	OFF or 0 (preset value)		Does not execute self calibration for the test set at user
			defined intervals.
Query response	{10}<newline><^END>
Example of use	10	OUTPUT 717;":SENS1:CORR:MULT:SELF ON"
	20	OUTPUT 717;":SENS1:CORR:MULT:SELF?"
	30	ENTER 717;A
Related commands	:SENS{1-4}:MULT on page 81
	:SENS{1-4}:CORR:MULT:SELF:TIM on page 80
Equivalent key	[Cal] - Test Set Cal - Self Cal

78 Chapter 6