Agilent Technologies 87075C manual Measurement Procedures, Multiport Test System

Making Measurements

Measurement Procedures

Measurement Procedures

Measurement is performed in 4 major steps below.

•Setting the port connections of the multi-port test set

•Setting the measurement conditions

•Calibrating the test set

•Performing measurement

Multiport test system needs to be properly installed before making measurements. For the installation procedure see “Installation” on page 1-7.

Figure 2-1 Multiport Test System

Setting port connections of the multi-port test set

The procedure to set the test set port connections is described below. Note that the port connections are set separately for each measurement channel.

Step 1. Press [Channel Next] or [Channel Prev] to select the channel for which you want to execute multi-port measurement.

22 Chapter 2