Agilent Technologies 87075C manual SENS1-4CORRMULTCOLLISOL, SCPI Command Reference, Chapter

		SCPI Command Reference
		:SENS{1-4}:CORR:MULT:COLL:ISOL
	:SENS{1-4}:CORR:MULT:COLL:ISOL
Syntax	:SENSe{[1]234}:CORRection:MULTiport:COLLect[:ACQuire]:ISOLation <value 1>,<value 2>
Description	For channel 1 to channel 4, measures isolation calibration data for the specified port
	pair.
NOTE	If 2 ports you specify are not a port pair, an error occurs. Also, if
	:SENS{1-4}:MULTon page 81 is off, an error occur.
Parameters
		Description
	value 1	Specifies a port of the test set port pair for which isolation
		calibration data is measured.
	value 2	Specifies the other port of the test set port pair for which
		isolation calibration data is measured.
Query response	No query
Example of use	10 OUTPUT 717;":SENS1:CORR:MULT:COLL:ISOL 1,2"
Related commands	:SENS{1-4}:MULTon page 81
	:SENS{1-4}:CORR:MULT:COLL:OPEN on page 74
	:SENS{1-4}:CORR:MULT:COLL:SHOR on page 76
	:SENS{1-4}:CORR:MULT:COLL:LOAD on page 72
	:SENS{1-4}:CORR:MULT:COLL:THRU on page 77
Equivalent key	[Cal] - Test Set Cal - Calibration - Port x-y - Port x-y Isol (Optional)

Chapter 6 71