| COM Object Reference |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. SAVE |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. |
| SAVE |
Object type | Property |
Syntax | SCPI.SENSe(Ch).CORRection.MULTiport.COLLect.SAVE |
Description | For the active trace of channels 1 to 4 (Ch), calculates the calibration coefficients |
| depending on the selected calibration type. Calibration coefficient is calculated for |
| all port pairs that have all necessary measured calibration data for calculation. If |
| none of the port pair has all necessary data for calculation, an error occurs and the |
| command is ignored. The command clears all measured calibration data of the |
| channel. (No query) |
|
|
NOTE | The same calibration method must be used for all port pairs to be used in a channel. |
| Therefore, if calibration is executed after changing the calibration method by |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. METHod on page 98, all |
| the calibration coefficient for the different calibration method will be discarded. |
|
|
Variable | For information on the variable (Ch), see Table |
Examples | SCPI.SENSe(1).CORRection.MULTiport.COLLect.SAVE |
Related objects | SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. ACQuire.LOAD on |
| page 93 |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. ACQuire.OPEN on |
| page 94 |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. ACQuire.SHORt on |
| page 95 |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. ACQuire.THRU on |
| page 96 |
| SCPI.SENSe(Ch).CORRection.MULTiport.COLLect. METHod on page 98 |
Equivalent key | [CAL] - Test Set Cal - Calibration - Done |
100 | Chapter 7 |
