TANDBERG Security Camera manual Example xCommand CredentialDelete CredentialId

Grey Headline (continued)

Command Reference - xCommand

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

CheckPattern

A diagnostic tool that allows you to check the result of an alias transform (local or zone) before you configure it on the system. Note that this command does not change any existing system configuration.

Target(r): <S: 1, 60>

The original alias.

Pattern(r): <S: 1, 60>

The pattern against which the alias is to be compared.

Type(r): <Exact/Prefix/Suffix/Regex>

The way in which the pattern must match the alias in order for the transform to be applied.

Behavior(r): <Strip/Replace>

The way in which the alias will be modified.

Replace: <S: 1, 60>

(Applies only if Behavior is set to Replace.) The string to be substituted for the part of the alias that matched the pattern.

Example: xCommand CheckPattern Target: "john.smith@example.net" Pattern: "@example.net" Type: "suffix" Behavior: replace Replace: "@example.com"

CredentialAdd

Adds an entry to the local authentication database.

CredentialName(r): <S: 1, 128>

Defines the name for this entry in the local authentication database.

CredentialPassword(r): <S: 1, 128>

Defines the password for this entry in the local authentication database.

Example: xCommand CredentialAdd CredentialName: "John Smith" CredentialPassword: "password123"

CredentialDelete

Deletes an entry from the local authentication database.

CredentialId(r): <1..2500>

The index of the credential to be deleted.

Example: xCommand CredentialDelete CredentialId: 2

DefaultLinksAdd

Restores links between the Default Subzone, Traversal Subzone and the Default Zone.

This command has no parameters.

Example: xCommand DefaultLinksAdd

Introduction	Getting Started	Overview and	System	VCS	Zones and	Call	Bandwidth	Firewall	Maintenance	Appendices
		Status	Configuration	Configuration	Neighbors	Processing	Control	Traversal
D14049.03					217
MAY 2008