TANDBERG Security Camera manual Example xCommand OptionKeyDelete OptionKeyId

Grey Headline (continued)

Command Reference - xCommand

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

OptionKeyDelete

Deletes a software option key from the VCS.

OptionKeyId(r): <1..64>

Specifies the ID of the software option to be deleted.

Example: xCommand OptionKeyDelete OptionKeyId: 2

PipeAdd

Adds and configures a new pipe.

PipeName(r): <S: 1, 50>

Assigns a name to this pipe. TotalMode: <Unlimited/Limited/NoBandwidth>

Determines whether or not this pipe is enforcing total bandwidth restrictions. NoBandwidth: no bandwidth available; no calls can be made using this pipe.

Total: <1..100000000>

If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.

PerCallMode: <Unlimited/Limited/NoBandwidth>

Determines whether or not this pipe is limiting the bandwidth of individual calls. NoBandwidth: no bandwidth available; no calls can be made using this pipe.

PerCall: <1..100000000>

If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.

Example: xCommand PipeAdd PipeName: "512k ADSL" TotalMode: Limited Total: 512 PerCallMode: Limited PerCall: 128

PipeDelete

Deletes a pipe.

PipeId(r): <1..100>

The index of the pipe to be deleted.

Example: xCommand PipeDelete PipeId: 2

RemoveRegistration

Removes a registration from the VCS.

Registration: <1..3750>

The index number of the registration to be removed.

RegistrationSerialNumber: <S: 0, 255>

The serial number of the registration to be removed.

Example: xCommand RemoveRegistration RegistrationSerialNumber: "a761c4bc-25c9-11b2-a37f-0010f30f521c"

Introduction	Getting Started	Overview and	System	VCS	Zones and	Call	Bandwidth	Firewall	Maintenance	Appendices
		Status	Configuration	Configuration	Neighbors	Processing	Control	Traversal
D14049.03					222
MAY 2008