Grey Headline (continued)
Subzones
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Creating a Subzone
To add a new subzone:
•VCS Configuration > Local Zone > Subzones. You will be taken to the Subzones page. Select New.
You will be taken to the Create Subzone page.
•xCommand SubZoneAdd
Name
Enter the name you wish to assign to the subzone. You will refer to this name when creating Links.
Subnet 1 address
Enter the IP address of the subnet. In conjunction with the Prefix, this will define the range of IP addresses that will belong to this subzone.
Up to 4 further subnets can be configured once the subzone has been created via the Edit Subzone page.
Prefix length
Enter the number of bits of the Subnet IP Address which must match for an IP address to belong in this subzone.
Address range =
This shows the range of IP addresses that will be allocated to this subzone, based on the combination of the subnet address and prefix length that have been configured.
Bandwidth
See Applying Bandwidth Limitations to Subzones for a description of these fields.
Create Subzone
Click here to create the subzone and return to the subzones page.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and |
| Call | Bandwidth | Firewall |
| Maintenance |
| Appendices |
| Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing | Control | Traversal |
|
| ||||
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 133 |
|
|
|
|
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
