Grey Headline (continued)
Configuring the VCS as a Traversal Server
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Overview
The VCS Expressway can act as a firewall traversal server. This feature means you can:
•Allow your VCS to act as a traversal server for other VCSs and TANDBERG Gatekeepers. You do this by adding a new traversal server zone on the VCS, and configuring it with details of the traversal client.
•Provide firewall traversal for any traversal- enabled endpoints (i.e. TANDBERG MXP endpoints and any other endpoints that support the ITU H.460.18 and H.460.19 standards) registered directly with it. You can configure the protocols and ports that will be used.
•Enable and configure STUN services.
•Configure the ports used specifically for firewall traversal services.
The following sections describe how to configure each of the above options.
Adding a New Traversal Server Zone
•VCS Configuration > Zones.
You will be taken to the Zones page. Select New.
You will be taken to the Create Zone page.
•xCommand ZoneAdd
Name
Enter the name you wish to give to this zone. The name acts as a unique identifier, allowing you to distinguish between zones.
Type
From the Type
TraversalServer.
Create Zone
Click here to create the zone. You will be taken directly to the Edit Zone page, where you can configure the traversal server zone as required.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and |
| Call |
| Bandwidth | Firewall | Maintenance |
| Appendices |
| Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control | Traversal |
| ||||
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 154 |
|
|
|
|
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
