Grey Headline (continued)
Searches and Transforms
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Zone Searching and Transforming
Configuring Zone Searches and
Transforms
To configure when a zone will be searched and any transforms that will be applied before the search request is sent:
•VCS Configuration > Zones.
You will be taken to the Zones page.
Click on the zone you wish to configure. You will be taken to the Edit Zone page.
Scroll down until you get to the Match1 section.
•xConfiguration Zones Zone [1..200] Match [1..5]
You can configure up to five different Matches (i.e. search/transform combinations) for each zone.
Default Settings
When a new zone is created, by default Match1 will be set to AlwaysMatch with a Priority of 100. All remaining matches will be set to Disabled. This means that the zone will be queried for the original alias, with no transforms applied.
Zone transforms support the use of
Regular Expressions in both the Pattern String and Replace String fields. See
the Appendix Regular Expression Reference for more information.
Replace string
(Applies only if the Mode is PatternMatch and Pattern Behavior is Replace.)
Specifies the string to be used as a substitution for the part of the alias that matched the pattern.
Pattern behavior
(Applies only if the Mode is PatternMatch.)
Determines if and how the matched part of the alias will be modified. Options are:
Leave: the alias will not be modified.
Strip: the matching prefix or suffix will be removed from the alias.
Replace: the matching part of the alias will be substituted with the text in the Replace String.
Mode
Determines if and when a query will be sent to this zone. Options are:
AlwaysMatch: the zone will always be queried.
PatternMatch: the zone will only be queried if the alias queried for matches the specified Pattern String.
Disabled: this match is not used. If all 5 matches for a zone are disabled, the zone will never be queried.
Priority
Determines the order in which the zone will be sent a search request. Zones with priority 1 matches are searched first, followed by priority 2, and so on. More than one match can be assigned the same priority; in this case the matches will be queried simultaneously.
Pattern string
(Applies only if the Mode is PatternMatch.)
Specifies the pattern against which the alias is compared.
Pattern type
(Applies only if the Mode is PatternMatch.)
Determines the way in which the string must match the alias. Options are:
Exact: the string must match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string will be treated as a regular expression.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and | Call | Bandwidth | Firewall |
| Status |
| Configuration |
| Configuration |
| Neighbors | Processing | Control | Traversal | ||
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 109 |
|
| |
MAY 2008 |
|
|
|
|
|
|
|
|
|
| ||
