Grey Headline (continued)
URI Dialing
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
URI Dialing for Outgoing Calls
Adding and Configuring DNS Zones
In order for locally registered endpoints to use URI dialing through the VCS, you must configure at least one DNS zone. To do this:
•VCS Configuration > Zones.
You will be taken to the Zones page. Click New.
You will be taken to the Create Zone page.
Enter a Name for the zone and select a Type of DNS.
Click Create Zone.
You will be taken to the Edit Zone page.
•xCommand ZoneAdd
•xConfiguration Zones Zone [1..200]
Normal zone pattern matching and prioritization rules will apply to DNS zones.
When dialing by URI, the hop count
used is that configured for the DNS
zone that matches the URI address.
If there is no DNS zone configured that matches the URI address, then the query may be forwarded to a neighbor. In this case, the hop count used will be that configured for the neighbor zone.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and | Call | Bandwidth |
| Status |
| Configuration |
| Configuration |
| Neighbors | Processing | Control | ||
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 116 |
| |
MAY 2008 |
|
|
|
|
|
|
|
|
| ||
Firewall
Traversal
Name
Assigns a name to this zone.
Type
For DNS zones, this will be DNS.
Hop count
Specifies the hop count to be used when sending an alias search request to this zone. If the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.
SIP mode
Determines whether or not SIP calls will be allowed to this zone.
H.323 mode
Determines whether or not H.323 calls will be allowed to this zone.
Match1 - Match5
These sections allow you to specify any filtering criteria you wish to apply to this zone.
See Configuring Matches for DNS zones for full information on how the Match options can be used.
