Grey Headline (continued)
SIP
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Configuring SIP - Registrations, Protocols and Ports
SIP settings are configured via:
•VCS Configuration > Protocols > SIP > Configuration.
You will be taken to the SIP page.
•xConfiguration SIP
SIP mode
Determines whether or not the VCS will provide SIP functionality (i.e. SIP Registrar and SIP proxy services).
Registration expire delta
Specifies the period within which a SIP endpoint must
The default is 60.
SIP registration proxy mode
Specifies how proxied registrations and invites will be handled.
Off: Registration requests will not be proxied (but will still be permitted locally if the VCS is authoritative for that domain). Invite requests with existing Route Sets will be rejected.
Proxy to known only: Registration requests will be proxied, and invite requests will be proxied only if the Route Set contains the URI(s) of neighbors (including traversal clients and traversal servers).
Proxy to any: Registration requests and invite requests will always be proxied.
| TCP Outbound Port Start |
|
|
|
| TCP Outbound Port End |
|
| Save |
|
| |||||
| Specifies the lower port in the range to be used |
|
| Specifies the upper port in the range to be |
| Click here to save your changes. |
| |||||||||
| by outbound TCP/TLS SIP connections. |
|
| used by outbound TCP/TLS SIP connections. |
|
|
|
|
|
| ||||||
| The default is 25000. |
|
|
|
| The default is 29999. |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Introduction | Getting Started |
| Overview and |
|
| System | VCS | Zones and |
|
| Call |
| Bandwidth | Firewall | |
|
| Status |
|
| Configuration | Configuration | Neighbors |
|
| Processing |
| Control | Traversal | |||
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| D14049.03 |
|
|
|
|
|
|
|
| 64 |
|
|
| |||
| MAY 2008 |
|
|
|
|
|
|
|
|
|
|
| ||||
UDP mode
Determines whether or not incoming SIP calls using the UDP protocol will be allowed.
The default is On.
UDP port
Specifies the listening port for incoming SIP calls over UDP.
The default is 5060.
TCP mode
Determines whether or not incoming SIP calls using the TCP protocol will be allowed.
The default is On.
TCP port
Specifies the listening port for incoming SIP calls over TCP.
The default is 5060.
TLS mode
Determines whether or not incoming SIP calls using the TLS protocol will be allowed.
The default is On.
TLS port
Specifies the listening port for incoming SIP calls over TLS.
The default is 5061.
