Grey Headline (continued)
Shutting Down
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Overview |
| Shutting Down |
|
|
|
The system must be shut down before it is unplugged.
Once the system has been shut down, the only way it can be restarted is by pressing the soft power button on the unit itself. You must therefore have physical access to the unit if you wish to be able to restart it after it has been shut down.
Shutting down will cause any active calls and registrations to be terminated. For this reason, the Shutdown page displays the number of current calls and registrations, so you can check these before you restart.
!Do not shutdown the system while the red ALM LED on 
the front of the box is on. This indicates a hardware
fault. Contact your TANDBERG representative.
To shut down the VCS:
•Maintenance > Shutdown.
You will be taken to the Shutdown page.
Shutdown System
Click here to shutdown the system.
The Shutting Down page will appear. This page will remain in place once the system has successfully shut down but any attempts to refresh the page or access the VCS will then be unsuccessful.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and |
| Call |
| Bandwidth |
| Firewall | Maintenance | Appendices |
| Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control |
| Traversal | ||||
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 169 |
|
|
|
|
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
