How to Give Your Dishwasher a New Look— Change
Its Color!
Two panels are held in place by the door trim and the trim on the panel below the door. Each side of each panel is a different color. Or you can paint a panel with the color of your own choice.
How To Change Door Panel Inserts:
1.Take out the three screws on either side of the dishwasher door. Remove the side trim.
2.Slide out both insert panels at once.
3.Put the panel with the color you want in front. (Handle the panels carefully. The edges may be sharp.)
4.Replace side trim and screws.
How To Change
1.Remove two screws in the black
2.Remove entire panel.
3.Take out three screws and remove top trim.
4.Slide out both insert panels at once.
5.Replace panels with color you want in front.
6.Replace top trim and screws.
7.Replace entire panel and the screws under the
Color insert paneIs for both the door and the panel can be replaced by
Dimensions for ‘ 4” wood inser{s: Door Panel: 191J8°high x 23’,,” wide, Lower Panel: 4~4°high ~ 239,6” wide.
Note: Do not operate dishwasher while changing panels or when lower access panel is removed.
Change color in minutes. Just remove trim and change. You have a choice of four colors. One panel is White on one side, Almond on the other Second panel is Black or Harvest.
User Maintenance Instructions
To keep your dishwasher
at its best...
Clean the control panel with a lightly dampened cloth. Dry thoroughly. Do not use abrasives or sharp objects on the panel. They can damage it.
Clean the outside with a good appliance polish wax. The outside cabinet finish is durable, but it can scratch. So use no scouring pads. harsh or gritty cleaners.
Appliance Polish Wax & Cleaner (Cat. No. WR97X216) is available from GE Appliance Parts Marts.
The inside usually takes care of itself. If it should ever need cleaning, use a mild cleansing powder. Scouring pads and harsh cleansers can mar the finish.
Not using the dishwasher in winter? Protect against freezing.
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
●Cut off electric power to dish- washer. Remove fuses or trip circuit breaker.
. Turn off water supply.
●Disconnect water inlet line from water valve.
. Drain water from inlet line and water valve. (Use a pan to catch the water.)
s Reconnect water inlet line to water valve.
●Remove the plug in the bottom of the rubber boot. Drain completely, then reinstall plug and clamp,
. Drain the collection chamber at rear of unit below filter by disconnecting hose to pump. Reconnect after draining.
An air gap is a plumbing device. It protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. And you may not even have one. Not all plumbing codes require air gaps.
TWO TYPES I | - ““ |
If you have an air gap, check it at least once a month. THE AIR GAP IS NOT PART OF YOUR DISH- WASHER. IT IS NOT COVERED IN YOUR WARRANTY.
The air gap is easy to clean. With most types, first turn off the dish- washer, then lift off the chrome cover. Then unscrew the plastic cap and check for any
Check the air gap any time your dishwasher isn’t draining well.
