CONNECTION TO AN
EXTERNAL UNIT I
Usea commercially available connection cord which has a 3.5mm stereo plug at one end and two phono plugs at the other end.
Connect the stereo plug to the LINE OUT jack
of the unit and connect thephono plugs to the analog input (AUX) terminals of the external unit.
NOTE
Turn off the power of both units before connection. DO NOT connect to the PHONO(magnetic pickup) inputs of an amplifier.
Volume and bass boost on this unit have no effect on the line output.
I
LINE OUT
LINE IN
CD IN
AUX
MAINTENANCE
To clean the lens J
If the lens become dirty, the player will skip or not play, If this occurs, clean the lens in the following. manner, To remove dust or dust particles, first use a camera lens blower/brush 1 to blow a few times to loosen particles, then gently brush the lens 2 clean finish by blowing the lens again.
Note
Take care not to get too much solution on the swab. which could flow into the unit and cause damage. Pressing too strongly with the swab could scratch or break the lens.
To clean the discs K
Before playing, wipe the disc from the center out with a cleaning cloth, After playing, store the disc in its case.
J | 1 |
| |
| 2 |
K |
|
