BEFORE PLAYBACK
HOLD switch D
Release the HOLD switch to OFF position before playback. When not using the unit, set the HOLD switch to the ON position, Accidentally pressed button will not function. If buttons are pressed when the HOLD switch is set to the ON position."HOLD" will light on the display.
Turning on and off D
Turning the power on
Press
PLAY/PAUSE. Power is turned on and playback starts.
Turning off the power
If no new operations are done within 30 seconds from the end of last operation, the power is turned off automatically. (Auto power off function) you can turn off the power before it is automatically turned off by pressing 
STOP
Standby mode D
When an operation finishes,the unit goes into standby mode until the auto power off function automatically turns off the power.
To enter standby mode, press
PLAY/PAUSE to start playback, then press 
STOP
Adjusting the sound
Volume E
Turn the VOLUME control to adjust the volume.
X-BASS E
Switch on the
1.Push the OPEN switch to open the disc compartment
2.Place a disc in the center with the label side facing up.
3.Close the disc compartment.
To remove the disc G
Pick up the disc, holding its edge, while pressing the pivot gently.
D
E
BASS |
F |
G |
