Grey Headline (continued)
Administrator Policy
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Configuring Administrator Policy via the Web Interface
To configure Administrator Policy using the web interface:
•VCS Configuration > Policy > Administrator. You will be taken to the Administrator Policy page.
You will not be able to use the web ! interface to configure Administrator
Policy if a CPL file is already in place. If this is the case, you will have the option to Delete Existing file. Doing so will delete the existing Administrator Policy and enable use of the web interface for Administrator Policy configuration.
Administrator Policy
This section shows the
To edit the existing policy, click Add New.
Source
The alias that the calling endpoint used to identify itself when placing the call. This field supports Regular Expressions.
Unauthenticated user
Check this box if you wish the new policy to apply to all incoming calls where the endpoint making the call is not either:
•locally registered and authenticated with the
VCS, or
•registered and authenticated to a neighbor which in turn has authenticated with the local VCS.
Delete
To remove one or more line items from the list, check the box to the left of the item and then click Delete.
Add New
Click to add the new item to the Policy. A new row with empty fields for you to complete will appear.
and 
Each combination of Source and Destination is compared, in the order shown, with the details of the call being made until a match is found. To move a particular item to higher or
lower in the list, click on the 
and 
icons respectively.
Destination
The alias that the endpoint dialed to make the call. This field supports Regular Expressions.
Action
Whether or not the call will be permitted.
Allow: if both the Source and Destination aliases match those listed, call processing will continue.
Reject: if both the Source and Destination aliases match those listed, the call will be rejected.
Cancel
Returns to the Administrator Policy page without adding the new item.
Add
Adds the new item to the Administrator Policy.
Commit
Updates the existing Administrator Policy with the changes you have made.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and | Call | Bandwidth | Firewall |
| Status |
| Configuration |
| Configuration |
| Neighbors | Processing | Control | Traversal | ||
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 97 |
|
| |
MAY 2008 |
|
|
|
|
|
|
|
|
|
| ||
