Grey Headline (continued)
IP Status
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Viewing the IP Status Page |
| Understanding the IP Status Page |
|
|
|
The IP Status page provides details of the IP and DNS settings of the VCS.
To view the IP Status page:
•Status > System > IP
Protocol
Indicates the IP protocol supported by the VCS.
IPv4: The VCS will only accept registrations from endpoints using an IPv4 address, and will only take calls between two endpoints or devices communicating via IPv4. It will communicate with other systems via IPv4 only.
IPv6: The VCS will only accept registrations from endpoints using an IPv6 address, and will only take calls between two endpoints communicating via IPv6. It will communicate with other systems via IPv6 only.
Both: The VCS will accept registrations from endpoints using either an IPv4 or IPv6 address, and will take calls using either protocol. If a call is between an
Server 1..5 address
The IP address(es) of each of the DNS servers that will be queried when resolving domain names. Up to 5 DNS servers may be configured.
Domain
Specifies the name to be appended to the host name before a query to the DNS server is executed.
Introduction | Getting Started | Overview and | System |
| VCS |
| Zones and |
| Call |
| Bandwidth |
Status | Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control | ||
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
| 28 |
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
| |||
IPv4 gateway
The IPv4 gateway used by VCS.
IPv6 gateway
The IPv6 gateway used by VCS.
IPv4 address
The IPv4 address configured on the VCS.
If the Dual Network Interfaces option key has been installed, this will show the IPv4 addresses for both the LAN1 port and the LAN2 port.
IPv4 subnet mask
The IPv4 subnet mask configured on the VCS.
If the Dual Network Interfaces option key has been installed, this will show the IPv4 subnet masks for both the LAN1 port and the LAN2 port.
IPv6 address
The IPv6 address configured on the VCS.
If the Dual Network Interfaces option key has been installed, this will show the IPv6 addresses for both the LAN1 port and the LAN2 port.
Firewall Maintenance Appendices
Traversal
