Grey Headline (continued)
Command Reference - xCommand
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Overview
The xCommand group of commands are used to add and delete items and issue system commands.
The following pages list all the xCommand commands currently available on the VCS.
To issue a command, type the command as shown, followed by one or more of the given parameters and values. The valid values for each parameter are indicated in the angle brackets following each parameter; these are explained opposite.
To obtain information about using each of the xCommand commands from within the CLI:
•type xCommand or xCommand ? to return all current xCommand commands available on the VCS.
•type xCommand <command> or xCommand <command> ? to return all parameters for that command, along with the valuespace and a description for each.
The valid values for this parameter are one of the options shown within the angle brackets.
The valid value for this parameter is an integer. The minimum and maximum values are shown within the angle brackets.
The valid value for this parameter is a string. The minimum and maximum number of characters is shown after the S.
When issuing this command, the string must be typed in double quotes.
(r)indicates that this is a required parameter. The (r) is not part of the command.
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and |
| Call |
| Bandwidth |
| Firewall |
| Maintenance | Appendices |
| Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control |
| Traversal |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
|
|
| 215 |
|
|
|
|
|
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
